 DESCRIPTION OF PRODUCT
 is a standard panel of roof "STRUCTURAL PANEL". it incorporates the traditional rafters of the roof, which are screwed onto a CP 3 folds 19 mm (resin or other) which serves as the ceiling and EPS insulation is inserted in the factory, which provides the thermal and acoustic performance, this last being of type PSE Graphite (PG 32) which combines the thermal and acoustic performances or of type PSE TH 38. (economic solution).
FIELD OF APPLICATION
New and restoration : pose on loft beams or rafters.
Wood Touch is appropriate for all the types of covers: tiles, slates, bituminous shingles, metal sheets etc...
( refer to the corresponding DTU for each case ) .
ADVANTAGES OF PANEL
- 4 simultaneous functions: ceiling, insulation, raftering, ventilation
- Interior facing of high quality, traditional appearance "broad boards 20 cm" or spruce 15 cm.
- Possibilities of varied completions: old wood appearance, lasuré, varnished
- Ranges between important beams (powerful mechanical resistance) .
- Great choice lengths
IMPLEMENTATION - Directly on the beams or the rafters those ones having a minimum width of 65 mm for the connection of
2 panels and 40 mm for the support of only one panel.
- In the case of panels on 2 supports reduce the distance between centres of 30%.
-Supports of the panels ( loft beam, beams etc ...) must perfectly plane and be aligned.
- Fixing by L points or coach screws on support beams. obligatory Pre-drilling.
- Treatment of the side joints by band posed in factory or foaming PU (bends).
- Installation of a self-adhesive band (aluminum or phonic) to the joints.
- The installation of the cover is made with the progress of work.
Storage of the panels always to the shelter of the bad weather.
|
