CHARACTERISTICS

acoustic insulation

Technical Details

GAMME DPX 32

				RT 2005
Thickness of insulation	80	100	120	130	140**	160**
Overall thickness (mm)	112	132	162	162	162	185
Wood section (mm)	25/100	24/120	25/150	25/150	25/150	25/175
Weight of panel (kg/m²)	14	14.50	15	15	15.50	19
U-value of panels with rafters	0.42	0.35	0.30	0.28	0.26	0.23
U-value without rafters*	0.36	0.30	0.26	0.24	0.22	0.19
R-value without rafters*	2.78	3.43	4.00	4.31	4.62	5.25
Under side: plasterboard (DPXP) - ~Particle board CTBH (DPXP) – vinyl (DPXV) – wood panels (DPXD) - acoustic (DPXA) for DPXD add 10mm to overall thickness and for DPXA add 25mm to overall thickness values given are an indication taking account of the insulation + under-side + standard values 0.28 and without rafters (RT2000 minimum value U=0.30) *add on site an air gap to ensure ventilation

Downward Load	80	100	120	140	160		DIMENSIONS
100kg/m²	260	290	330	330	350		Width in mm	600
150kg/m²	220	260	300	300	320		Lenght in mm	2400 - 3000 - 3600 - 4200 - 4800
200kg/m²	200	240	280	280	300			Other dimensions possible*
Values given are for panels resting on 3 supports, in the case of 2 supports reduce the value by 30%							refer to Beopan CD available from web site www.beopan.com

ACOUSTIC INSULATION (FOR EXTERIOR NOISE)
Hz frequency	125	250	500	1000	2000	4000
R1 (dB)	17,9 à 34	28 à 45	40,5 à 49	44,9 à 52	47,8 à 49	52 à 57
These values are for the DPXP panels of 120mm with various coverings, these results were obtained through tests carried out on complete roofs at CTBA and at the Lafarge laboratory with independent validation by SOCOTEC. For further information or for a specific study contact our development office. Note: 3 dB difference reduce acoustic level by two.

GAMME PSE Th38

				RT 2005
Insulant width	80	100	120	140**	160**
Total width (mm)	112	132	162	162	185
Wood section (mm)	25/100	24/120	25/150	25/150	25/175
Weight of panel (kg/m²)	14	14.50	15	15.50	19
U-value without rafters	0.47	0.39	0.33	0.28	0.26
U-value without rafters*	0.36	0.33	0.28	0.23	0.21
R-value without rafters*	2.63	3.03	3.57	4.34	4.76
Finishes: Plasterboard (PEP) – Particle board (PEH) – Spruce panels (PED add 12mm to overall thickness) - Acoustic (PEA add 25mm to overall thickness) – Vinyl M1 (PEV) – OSB (PEO) For other finishes and dimensions consult us. * Values given to title codes refering to insulator + under-face + contractual values 0,28 and except rafters (RT2005 valeur minimum U = 0,28) add on building site an additional rise to ensure ventilation. Technical Certificate CSTB 2/02-967 Our insulation is recyclable**