CHARACTERISTICS roof sandwich panel

 

Technical Details

PLASTER PANEL UNDERSIDE Fire classification M1

        RT 2005        
Thickness of insulation (mm) 80 100 120 130 140 160 180 200
Overall thickness (mm) 105 125 145 155 165 185 205 225
Weight of panel (kg/m²) 15.60 15.90 16,20 16,30 16,50 16,80 17,10 17,40
U-value of panels* 0,41 0,34 0,30 0,28 0.26 0.23 0,21 0,19
R-value * 2,22 2,72 3,22 3,47 3,72 4,32 4,82 5,31
- PEPS (plasterboard), PEHS (Clipboard Underside CTBH), PESE L5 (spruce panels), PESE W3 (Wood Touch),
- PEAS ( Soundproof underside : add 25 mm to total width ) OEVS ( vynil underside )
- PEMS (STRAND BOARD) Sous-faces bois : se reporter au cataloque spécifique, PEOS (OSB)
* Other thicknesses, others under faces, other formats nous consulter.
* les coeffcients U et R donnés suivant AT. Rappel RT 2005 U = 0,28

GAMME PG**

      RT 2005          
Thickness of insulation (mm) 80 100 110 120 140 160 180 200
Overall thickness (mm) 105 125 135 145 165 185 205 225
Weight of panel (kg/m²) 16,8 17,4 17,7 18 18,6 19,2 19,8 20,4
U-value of panels* 0,36 0,30 0,27 0,25 0,22 0,20 0,18 0,16
R-value* 2,62 3,22 3,52 3,87 4,42 5,12 5,72 6,32
- PGPS (sous-face plâtre hydro), PGHS (sous-face CTBH)
- PGSE L5 (lambris 5 lames), PGAS (sous-face acoustique :ajouter 25 mm à l'épaisseur totale)
- PGMS (sous-face mélaminée), PGVS (sous-face vynil), PGOS (sous-face OSB)
- PGSE W3 (CP 3 plis - 3 planches) Wood Touch
* les coeffcients U et R donnés suivant AT. Rappel RT 2005 U = 0,28
** PG : PSE graphite Lambda 32.

MAXIMUM DISTANCE BETWEEN CENTRES OF the SUPPORTS in cm( 3 supports)

Epaisseur isolant charge 60 80 100 120 140 160 180 200
100 kg 150 210 240 240 240 240 240 240
150 kg 150 180 210 210 210 210 210 210
200 kg 120 150 180 180 180 180 180 180
- Values given as an indication on 3 supports. In the case of 2 supports to reduce the values from approximately 30%.
* Wood Touch

DIMENSIONS

Pour les PEPS - PEHS - PGPS - PGHS
Width (mm) Length (mm)  
600 2400
3000
3600
4200
4800
 
 
 
Other possible dimensions. contact us
PESE et PGSE se reporter au catalogue spécifique (sous-faces bois)