 DESCRIPTION OF PRODUCT
 is a panel which is structural; this means it incorporates the traditional rafters of the roof, which are screwed onto a board which serves as the ceiling and EPS insulation is inserted in the factory, which provides the thermal and acoustic performance.
THE BENEFITS OF THE PANEL
The has an insulation which limits the transfer of heat by conduction, convection and radiation, it therefore has the lowest lambda value of any product of this type: lamda 32. This insulation is approved by ACERMI and complies with the new Thermal Regulations (RT2000/2005). As regards the ceiling, the elasified insulation provides a significant improvement in acoustic insulation for air-borne and road noise; it resolves in particular the problem of impact (rain, hail) Laboratory tests confirm the performance of DPX is largely superior to existing panels on the market.
The incorporates an insulant which does not damage the environment; no gas is used thus preserving the ozone layer. In addition, it is 100% recyclable, which differs from many systems, which use more hazardous materials.
The uses an insulant, which has a European fire classification of Class B. In all cases, the roof panels conform to the “Guide to insulation for the interior of domestic dwellings with respect to the risks in case of fire”.
SIMPLIFIED APPLICATION
The make installation simple, the joints between panels are fitted in the factory (the panels can be supplied without joints by request and the panels can be joined on site with Polyurethane foam). Self-adhesive strips are placed along the laths, which prevent noise transmission (see detail). For further information see the Technical Details.
CEILING FINISHES
The range of ceiling finishes is very varied :
- Plaster BA13 Hydro M1
- CTBH Particle board 12mm
- Northern Spruce panels
- Acoustic
- Vynil, OSB ...
- For other finishes contact us .
. |
