 DESCRIPTITION of PRODUCT
 is a "sandwich" roof panel.
Rigid insulator PSE Th38 or PSE graphite lambda 32 (PG) is inserted between 2 panels :
- 1 : higher part : CTBH 10 mm or 8 mm*
- 2 : ceiling underside : CP 3 resinous folds 18 mm grooved.
* A counter-lathing can be carried out in factory on request.
FIELD OF APPLICATION New and restoration: pose on beam or rafters .
Wood Touch is appropriate for all the types of covers: tiles, slates, bituminous shingles, metal sheets etc ...
(refer to the corresponding DTU for each case)
ADVANTAGES OF PANEL - Interior facing of high quality appearance tradition "broad boards 20 cm" or spruce 15 cm.
- Simplicity of implementation (weak weight) .
- Continuous insulation (no thermal bridge).Soundproofing.
- 4 lengths/ 1 fixed width 600 mm.
- Usable in weak slope (1% minimum).
- 2 directions of installation: parallel or perpendicular to the slope ( limited range)
IMPLEMENTATION
- Directly on the beams or the rafters those ones having a minimum width of 65 mm for the connection of
2 panels
and 40 mm for the support of only one panel.
- In the case of panels on 2 supports the installation in quincunx is recommended .
- Supports of the panels ( loft beam, beams etc ...) must perfectly plane and be aligned.
- Side assembly by strip .
- Fixing by twisted or grooved points on the support beams
( Minimum 3 points per width panel ). obligatory Pre-drilling
- Treatment of the higher joints using a self-adhesive band aluminum .
- The installation of the cover is made with the progress of work .
Storage of the panels always to the shelter of the bad weather .
|
